So is this design ready to be made by the community without issues?
Is their any one who has a lazor cutter that cut one with no problems & good feedback if that was a sticky on your forum they would get a lot of orders and would just have to run their machine on MDF or some material.
So it would mean they can source the material cut it and ship.
Otherwise others have to keep redoing thowse steps. Or is it still getting the kinks worked out?
DIYLILCNC
vers. 1.0.2
-
Posted 2 years ago #
-
@josheeg,
"without issues" depends on a lot of things. This is an open-source design, so much of the quality of the outcome depends on the builder. Also, parts availability varies depending on your location in the country/world.Check out the progress Bill and amigaman have made.
You're right, someone with a laser cutter could indeed produce kits, however my guess is that shipping would add a pretty good amount to the expense.
Posted 2 years ago #
Topic Closed
This topic has been closed to new replies.
